Publikationen / Publications:

• Anton Haumer, Ludwig Marvan:
  Die Integration von Simulator-Modellen in die Konfigurator-Umgebung einer B2B-Fachhandels-Plattform (in German)
  ASIM 2002, 16. Symposium Simulationstechnik
• Christian Kral, Franz Pirker, Anton Haumer, Matthias Haigis, Gert Pascoli:
  Comparison of a thermal CFD and a thermal equivalent circuit model of a squirrel cage induction machine
  ACEMP 2004, International Aegean Conference on Electrical Machines and Power Electronics
• Christian Kral, Anton Haumer:
  Modelica libraries for dc machines, three phase and polyphase machines
  Modelica 2005, 4^th International Modelica Conference
• Christian Kral, Anton Haumer, Markus Plainer:
  Simulation of a thermal model of a surface cooled squirrel cage induction machine by means of the SimpleFlow-library
  Modelica 2005, 4^th International Modelica Conference
• Christian Kral, Anton Haumer, Hansjörg Kapeller, Franz Pirker, Gert Pascoli:
  Comparison of Two Rotor Temperature Estimation Models of a Surface Cooled Squirrel Cage Induction Machine
  IEMDC 2005, IEEE International Electric Machines and Drives Conference
• Hansjöerg Kapeller, Anton Haumer, Christian Kral, Franz Pirker, Gert Pascoli:
  Identification and Controls of Electrically Excited Synchronous Machines
  Modelica 2006, 5^th International Modelica Conference
• Ulf Reisenbichler, Hansjöerg Kapeller, Anton Haumer, Christian Kral, Franz Pirker, Gert Pascoli:
  If we only had used XML...
  Modelica 2006, 5^th International Modelica Conference
• Arno Ebner, Anton Haumer, Dragan Simic, Franz Pirker:
  Interacting Modelica using a Named Pipe for Hardware-in-the-loop Simulation
  Modelica 2006, 5^th International Modelica Conference
• René Schimon, Dragan Simic, Anton Haumer, Christian Kral, Markus Plainer:
  Simulation of Components of a Thermal Power Plant
  Modelica 2006, 5^th International Modelica Conference
• Christian Kral, Anton Haumer, Matthias Haigis, Herrmann Lang, Hansjörg Kapeller:
  Comparison of Measurements with a CFD Analysis and a Thermal Equivalent Circuit Model of a TEFC Induction Machine
  ICEM 2006, XVII International Conference on Electrical Machines
• Herrmann Lang, Christian Kral, Anton Haumer, Matthias Haigis, Rudolf Schulz:
  Investigation of the Thermal Behavior of a Salient Pole Synchronous Machine
  ICEM 2006, XVII International Conference on Electrical Machines
• Christian Kral, Anton Haumer, Hansjörg Kapeller, Framz Pirker:
  Design and thermal simulation of induction machines for traction in electric and hybrid electric vehicles
  EVS22 2006, The 22^nd International Battery, Hybrid and Fuel Cell Electric Vehicle Symposium and Exposition
• Thomas Bäuml, Christian Kral, Anton Haumer, Hansjörg Kapeller:
  Enhanced Thermal Model of a Totally Enclosed Fan Cooled Squirrel Cage Induction Machine
  IEMDC 2007, IEEE International Electric Machines and Drives Conference
• Thomas Bäuml, Christian Kral, Anton Haumer, Hansjörg Kapeller, Harald Neudorfer:
  Thermal Design, Simulations and Measurements of a High Performance Double Air Cooled Traction Machine
  RTS 2007, 3^rd Conference on Railway Traction Systems
• Christian Kral, Anton Haumer, Hansjörg Kapeller, Franz Pirker:
  Design and Thermal Simulation of Induction Machines for Traction in Electric and Hybrid Electric Vehicles
  WEVA 2007, The World Electric Vehicle Association Journal, 1, pp.190-196
• Christian Kral, Anton Haumer, Franz Pirker:
  A Modelica Library for the Simulation of Electrical Assymetries in Multiphase Machines - The Extended Machines Library
  SDEMPED 2007, 6^th IEEE International Symposium on Diagnostics for Electric Machines, Power Electronics and Drives
• Herrmann Lang, Matthias Haigis, Christian Kral, Anton Haumer, Hansjörg Kapeller, Harald Neudorfer, Friedrich Dangl, Wolfgang Sollinger:
  Thermal Investigation of Rotating Electrical Machinery
  NAFEMS Congress 2007
• Dragan Simic, Anton Haumer, Thomas Bäuml, Franz Pirker:
  Modeling, Simulation and Evaluation of a Cooler Model in Modelica using Dymola
  VPPC 2007, IEEE Vehicle Power and Propulsion Conference
• Harald Giuliani, Claus-Jürgen Fenz, Anton Haumer, Hansjörg Kapeller:
  Simulation and Validation of Power Losses in the Buck-Converter Model included in the SmartElectricDrives Library
  Modelica 2008, 6^th International Modelica Conference
• Johannes Vinzenz Gragger, Anton Haumer, Christian Kral, Franz Pirker:
  Efficient Analysis of Harmonic Losses in PWM Voltage Source Induction Machine Drives with Modelica
  Modelica 2008, 6^th International Modelica Conference
• Anton Haumer, Christian Kral, Johannes Vinzenz Gragger, Hansjörg Kapeller:
  Quasi-Stationary Modeling and Simulation of Electrical Circuits using Complex Phasors
  Modelica 2008, 6^th International Modelica Conference
• Hansjörg Kapeller, Anton Haumer, Christian Kral, Gert Pascoli, Franz Pirker:
  Modeling and Simulation of a Large Chipper Drive
  Modelica 2008, 6^th International Modelica Conference
• Christian Kral, Anton Haumer:
  Simulation of Electrical Rotor Asymmetries in Squirrel Cage Induction Machines with the ExtendedMachines Library
  Modelica 2008, 6^th International Modelica Conference
• Christian Kral, Anton Haumer:
  Consistent Equivalent Circuit Parameters of Induction Motors for the Calculation of Partial Load Efficiencies
  IEEE International Smyposium on Industrial Electronics 2008
• Christian Kral, Anton Haumer, Thomas Bäuml:
  Thermal Model and Behavior of a Totally Enclosed Water Cooled Squirrel Cage Induction Motor for Traction Applications
  IEEE Transactions on Industrial Electronics, Vol.55, No.10, October 2008
• Johannes V. Gragger, Dragan Simic, Anton Haumer, Franz Pirker:
  Investigation of an Electrified Air Conditioning System for a SUV by Means of Multi-Physical Simulation
  SAE 2009 World Congress
• Hansjörg Kapeller, Anton Haumer, Christian Kral, Christian Grabner:
  Investigation of the Operational Behavor of a Large Chipper Drive
  World Congress on Engineering 2009
• Christian Kral, Anton Haumer, Christian Grabner:
  Consistent Induction Motor Parameters for the Calculation of Partial Load Efficiencies
  World Congress on Engineering 2009
• Christian Kral, Anton Haumer, Christian Grabner:
  Modeling and Simulation of Broken Rotor Bars in Squirrel Cage Induction Machines
  World Congress on Engineering 2009
• Christian Grabner, Johannes V. Gragger, Hansjörg Kapeller, Anton Haumer, Christian Kral:
  Sensorless Permanent Magnet Drive Design
  World Congress on Engineering 2009
• Christian Kral, Anton Haumer, Hansjörg Kapeller, Gert Pascoli:
  Modeling and Simulation of a Large Chipper Drive
  The Open Electrical and Electronic Engineering Journal, Vol.3, 2009
• Christian Kral, Anton Haumer, Bernhard Kubicek, Oliver Winter:
  Model of a Squirrel Cage Induction Machine with Interbar Conductances
  Modelica 2009, 7^th International Modelica Conference
• Helmut Kühnelt, Thomas Bäuml, Anton Haumer:
  SoundDuctFlow: A Modelica Library for Modeling Acoustics and Flow in Duct Networks
  Modelica 2009, 7^th International Modelica Conference
• Anton Haumer, Christian Kral, Hansjörg Kapeller, Thomas Bäuml, Johannes V. Gragger:
  The AdvancedMachines Library: Loss Models for Electric Machines
  Modelica 2009, 7^th International Modelica Conference
• Christian Kral, Hansjörg Kapeller, Johannes V. Gragger, Anton Haumer, Bernhard Kubicek:
  Phenomenon Rotor Fault - Multiple Electrical Rotor Asymmetries in Induction Machines
  SDEMPED 2009, 7^th IEEE International Symposium on Diagnostics for Electric Machines, Power Electronics and Drives
• Christian Kral, Anton Haumer, Matthias Haigis, Herrmann Lang, Hansjörg Kapeller:
  Comparison of a CFD Analysis and a Thermal Equivalent Circuit Model of a TEFC Induction Machine with Measurements
  IEEE Transactions On Energy Conversion, Vol. 24, No.4, April 2009
• Anton Haumer, Thomas Bäuml, Christian Kral:
  Multiphysical simulation improves engineering of electric drives
  7^th EUROSIM Congress on Modelling and Simulation 2010
• Christian Kral and Anton Haumer:
  The New FundamentalWave Library for Modeling Rotating Electrical Three Phase Machines
  Modelica 2011, 8^th International Modelica Conference
• Anton Haumer and Christian Kral:
  Modeling a Mains Connected PWM Converter with Voltage-Oriented Control
  Modelica 2011, 8^th International Modelica Conference
• Christian Kral and Anton Haumer:
  Object-Oriented Modeling of Rotating Electrical Machines
  Book Chapter: Advances in Computer Science and Engineering, edited by Mathias Schmidt, Intech March 2011